Fax：(+86) 769 2229 0098
ADD：Tonghui Road, Dongcheng Science Park,
Greenway New Energy
ABOUT US PRODUCTS NEWS Scan QR code to follow
Watering Batteries- Introduction, Frequency And Results
The wet batteries are the batteries that have the most popular applications. It is because they are used in many vehicles that use these batteries for getting the power for electronic components. Other than this, the vehicles also use batteries to start the engine. However, apart from the vehicles, there are many other applications of these batteries like for the power backup at homes or offices.
As these batteries bring a lot of ease and practicality to our lives, they also ask for some things. One of those is care and maintenance. However, this is not difficult at all because you will only have to maintain the water level in your batteries. So, here we will discuss all about watering the wet cell batteries that you need to know.
Watering the batteries is the process of taking good care of the batteries. Hare by watering, it is not meant that you will only add water to the batteries. Sometimes you also need to remove the water from the batteries. It all depends on the gravity of the battery water. So, here we will discuss all about the battery watering.
The steps that you must include while you are watering your batteries.
The following are the steps that you will need to follow when you are watering your battery.
Checking the level and gravity of the battery water.
The first thing that you will need to do is to check the water level inside the battery. The water level will be lower if the plates of the battery cell are dry on the top and they are not submerged inside the battery water.? However, it will be extra if you can observe that the water level inside the battery is very close to the top of the battery.
In both cases, the battery will not be able to perform well. Another thing that you will need to check will be the gravity of the battery water. This can be done using the battery water gravity meter.
Maintaining the water level inside the battery.
This is the step where you will maintain the water level in the battery. IF you see that the water levels are more than the max limit, then you will need to remove some water from the battery. Otherwise, you can add more water if the water level is below the minimum water level of the battery.
If you see that the battery water level is maintained while the battery gravity is low, then you can also remove some water from the battery and charge it for a while, then you can add some water to your battery.