Who doesn’t know about cars and other kinds of vehicles They have become essential parts of our lives now, even if we don’t personally own them. Many people use motorcycles and cars for their daily activities. If we don’t have them personally, we use public transportation.
However, unless you are a vehicle enthusiast, you will not know that vehicles actually consist of batteries. Yes, there are actually some vehicles that have huge batteries inside of them, and without the batteries, the vehicles cannot run!
In this article, we will talk about everything related to the motor vehicle battery, from its construction, causes, and types of the motor vehicle battery.
How is a motor vehicle battery constructed
Do you know which vehicle that needs a motor vehicle battery to be able to run properly It’s no other than cars! Yes, without motor vehicle batteries, cars would not be able to run properly. It is a nature of theirs to depend on their batteries. That’s why it’s important for car owners to regularly maintain their motor vehicle battery, or else they will be in trouble later in the future.
There are some ways where you can make your own motor vehicle battery. It should be noted, however, that it’s not an easy feat.
What causes motor vehicle battery to fail
There are several reasons why motor vehicle batteries often end up failing here are some of the reasons:
Factory defect is one of the reasons why many motor vehicle batteries suffer from failures. The factory defects happen when you have a heavy-powered motor vehicle battery for your car and you only drive in short distances with the car. Such a bad driving habit can lead to the lack of a fully saturated charge on the car, resulting in the breakdown.
That’s why it’s not common to see such a battery defect in Europe. After all, Europeans are accustomed to long journeys, and their streets are not as congested as other places (of course, it also depends on the time and other factors. There are also moments when the road is congested).
Battery size also plays a big role at the failure of the motor vehicle battery. When the battery is too small, it can only give a certain amount of energy that can only do the basic needs for the car. When the battery is too small and the roads are congested, the result will be even worse; it will result in sulfation. That’s why it’s important to know the battery size you need for your car.
Have you ever drunk a coffee that hasn’t been stirred yet, so the sugar is at the bottom It will result in a bitter taste at the top.
Acid stratification is similar to the example above. Acid stratification happens when the electrolyte of the battery stays at the bottom of the battery instead of being distributed evenly from the top to the bottom. If you let it be, it will lead to battery failure.
You can solve acid stratification by constantly shaking the battery after letting it rest for a few days.
Do you know different types of motor vehicle batteries
There are different kinds of motor vehicle batteries you can check out. They are:
Deep Cycle Battery
Deep cycle batteries are batteries that might look regular for some people that actually hold more power compared to their regular peeps. Although the amount of power is not excessive, they can be pretty useful when they are used for golf carts and marine vehicles.
They are, however, perfect for cranking up the engine. So if you live in a cold place and need extra effort to start the engine, then a deep cycle battery is definitely the perfect choice for you.
Valve-Regulated Car Battery
If you or your vehicle is pretty clumsy, then you should consider a valve-regulated car battery. What makes the battery different is, of course, the valve it has! Because of its advanced design, this type of battery won’t spill when you invert, tilt, or even shake it (but don’t shake it unless you have to!).
Besides its convenient design, a valve-regulated car battery is also one of those life-saving batteries. They are designed to be as convenient as possible for you, so there is no need for you to spend lots of money to take care of them. Thanks to its low maintenance design, you won’t need to spend lots of time checking and servicing them.
There are two kinds of valve-regulated car batteries. They are Gel Cell and AGM (Absorption Glass Mat. Make sure you pick the one that’s suitable for your car the most. Learn to know the difference between the two products.
Wet-Cell or Dry-Cell AGM Battery
If you want something less inexpensive, you can opt for wet-cell or dry-cell AGM batteries. They are pretty much the same in terms of properties, but there is a difference in design between wet-cell and dry-cell AGM batteries.
Dry-cell AGM battery has a unique design where there is a separator that is made of glass mat. The purpose of the separator is to absorb electrolyte so when the battery has its position changed, there won’t be any spilling whatsoever.
Wet-cell AGM batteries don’t have the privilege of having the separator, so when you move the battery, there is a big chance that the electrolyte will spill. That’s why it’s a little bit hard when you want to move wet-cell AGM battery.
It doesn’t mean that wet-cell AGM batteries are bad, of course. There are some moments when the wet-cell battery is better for the car, so take your time at choosing between the two.
Understanding Motor Vehicle Battery Better
Now that you’ve known more about motor vehicle battery, we hope that you can understand your vehicle’s motor battery better. So, are you going to make your own battery, or are you going to buy one If you buy one, which one will you pick
lithium-ion battery e-bike battery lithium battery