博力威  EN

Greenway HK

博力威

Fax:(+86) 769 2229 0098
E-mail: info@greenway-battery.com

ADD:Tonghui Road, Dongcheng Science Park,

Dongguan,China

Subsidiaries

 Copyright ©2006-2020 Greenway battery | Lithium Battery Pack Manufacturer 粤ICP备11070025号

(+86)769 27282088

Hotline

 Greenway Technology

 

Greenway New Energy

    ↵       K-tech New Energy

Greenway Europe

ABOUT US                                   PRODUCTS                                                NEWS                                        Scan QR code to follow

NEWS

>
>
Making A Battery- Charger, and Usage

Making A Battery- Charger, and Usage

Page view

  The battery is the fundamental power source for any electronics wireless device, be it a laptop, smartphone, tablet, watch, or remote control. Can you visualize a world without these compact miracle energy sources? We wouldn't manufacture any wireless electronic appliances and depend on wired power sources only if there were no batteries. Even electric vehicles and space explorations would not be possible without batteries.

  A battery is a tool that holds energy sources and then transmits them by converting chemical energy into electricity. Regular batteries most often generate electricity by chemical processes through the use of one or more electrochemical cells. Batteries usually come in many sizes and forms. From minute cells utilized for power hearing aids to portable, thin cells wielded in smartphones, huge lead-acid batteries or lithium-ion batteries employed in cars, and massive battery banks procure emergency power for telephone industries and computer data headquarters.

  If you are searching on the Internet for a reliable piece of information on making battery chargers, then you are at the right place. This article will help you explore everything about "Making A Battery- Charger, And Usage."

  Making a Battery Charger

  Power at the go—isn't the invention of batteries just brilliant? They hold only a limited amount of electric power before running flat, generally at the most inconvenient of times. However, if you use a battery charger, that's less of a problem: insert your batteries in the charger, plugin, and in a few hours, they're as good as new and available to use again. That's why a good battery charger is as crucial as the batteries you insert into it.

  But before exploring the making of a battery charger, let's take a closer look at a battery charger and how does it work?  In simple terms, a battery charger is a tool used to fuel power into a cell or a battery by inducing an electric current into it.

  A standard rechargeable battery can be powered thousands of times, may last up to three or four years or even a decade or more. Moreover, it will save you hundreds of dollars in purchasing disposables.

  Battery chargers have various usages and can be employed for the following:

  ●Vehicles

  ●CCTV Cameras

  ●Electric Lawn Sprayers

  ●Mobile Phone Spammer

  ●Handheld Electric Airless Devices

  ●Solar Power system

  ●LED lights

  ●Electric Garden Sprayer

  ●Mechanical Cotton Picker

  They are moderately inexpensive & easy to build at home.  So, if you wish to make your battery charger, then follow the steps that are mentioned below:

  1)Assess the voltage of all the cell modules to verify if they are more or less similar.

  2)Setup the modules in a square or offset packing.

  3)Tag all your modules with positive and negative indications along with figures.

  4)Tin the cell modules.

  5)Trim the nickel wires long enough to stretch over from one solder blob to another on two undivided modules.

  6)Now link the nickel wires together and add the wires.

  7)Finally, seal the batteries.

  By performing all these steps, you are all set with your battery charger. However, you must never forget to utilize similar batteries when joining them in series because the hybrid batteries will not operate together appropriately and may get overheated.

  Making a Battery for Your Kinect

  We all cherish our Kinect devices, but one of the biggest problems, when you wish to operate it, is that it is a powered appliance which implies you have to be glued to a power switch or possess a long extension cord which is not always enjoyable. Therefore, you might have thought of making your battery charger for your Kinect so that you can enjoy it anytime and anyplace without being tied to a PowerPoint.

  To make a battery for your Kinect, all you require is:

  ●Soldering Iron

  ●soldering flux

  ●lead wire

  ●Hot glue gun

  ●Shielded USB Cable

  ●12V AC Adapter

  ●Some basic soldering skills and lots of patience

  Note: As per the Molex standards, the specified colors of wire denote:

  ●Yellow wire = 12v

  ●Black wire = Ground

  ●White wire = Data -

  ●Green wire = Data +

  ●Red wire = + 5V (The USB power)

  Steps to Follow:

  1)Trim the Kinect cable at the edge. You'll find six wires.

  2)Tin the wires; This implies you'll need to eliminate a part of the insulation and add a bit of solder to it.

  3)Cut the USB cable. You'll see similar color-coded wires. Connect it to the Kinect Wires. (Black to Black Yellow  to yellow and so on)

  Note: Ground is Ground; there is no distinct USB ground/AC Adapter ground. So, connect the AC Adapter and USB cable's ground (Black) to Kinect's Black wire.

  4)Put in some hot glue after you link every connection. So, the wires do not join together.

  5) And you are done. Voila.

  Making A Battery Out Of Lemon

  Who wouldn't be excited by utilizing lemon as a battery?  It is not just a fun and simple activity for your kids but can also be used for educational purposes.

  To make a battery out of a lemon, all you need is:

  ●Lemons

  ●Galvanized nails

  ●Chunks of copper

  ●Alligator clip wires

  ●A small light bulb to power up

  Steps to Follow:

  1)Squeeze the lemons to expel all the juice from them.

  2)Put in one galvanized nail and one chunk of copper into a lemon.

  3)Attach the edges of one wire to a pin in one lemon and then to a copper in another.  Now you must have one pin and one piece of copper unconnected.

  4)Connect the unattached chunk of copper (positive) and the detached nail (negative) to your light bulb's positive and negative connections. The lemon will work as the battery.

  5)Switch on your light bulb, and voila, you are all done.

  The Bottom Line

  Here we have reached the bottom line of the article. We hope you have a basic understanding of the "Making Battery- Charger and Usage." Although you can purchase a ready-made battery charger from your nearby store or an e-commerce platform, you can conveniently make them at home with the tools, parts, and some basic skills by following the simple instructions mentioned above.

lithium-ion battery  e-bike battery  lithium battery