Fax：(+86) 769 2229 0098
ADD：Tonghui Road, Dongcheng Science Park,
Greenway New Energy
ABOUT US PRODUCTS NEWS Scan QR code to follow
Maintenance tips for two wheeled battery products
Two wheeled battery manufacturers say that many people hope that their two-wheeled electric vehicles can last longer, so we cannot do without our daily maintenance of two wheeled battery products. Let’s take a look at it.
Electric vehicle battery maintenance skills:
First, the two wheeled battery manufacturer tells you that the sudden start and sudden braking of an electric vehicle will seriously consume battery power, so starting slowly and riding at a moderate speed can increase battery life.
Second, the two wheeled battery manufacturer tells you not to charge the battery when it runs out, which will seriously affect the battery life and even damage the battery. The battery of an electric car shows that the battery is low. Do not continue to use it. Although the car can ride for a while, but this may cause the battery to run out of electricity and seriously shorten the life.
Third, the two wheeled battery manufacturer tells you that if the battery is not used for a long time, it must be fully charged before storage, otherwise, the battery will be discharged in a natural state, which will seriously shorten the life.
Fourth, the battery is strictly prohibited to be used in parallel or series with other lithium batteries or lead-acid batteries, otherwise, the battery will be damaged due to overcharge and overdischarge of some batteries.
Five, the two wheeled battery manufacturer tells you not to shake the battery in the battery box, otherwise, the battery is very easy to be shaken.
Six, the two wheeled battery manufacturer tells you that because the lower the battery voltage, the greater the internal resistance, the more heat the battery will generate when the battery runs out during driving. Therefore, the battery is the best maintenance for the battery when it is used and charged. Generally, half of the charge is almost the same, and at most 30% of the power needs to be charged in time.