Fax：(+86) 769 2229 0098
ADD：Tonghui Road, Dongcheng Science Park,
Greenway New Energy
ABOUT US PRODUCTS NEWS Scan QR code to follow
LEV Battery manufacturers take you to understand the precautions for lithium battery storage
LEV Battery manufacturers tell you that lithium batteries generally use manganese dioxide as the positive electrode material, metal lithium or its alloy metal as the negative electrode material, and use a non-aqueous electrolyte solution.
The LEV Battery manufacturer tells you that the storage requirements are in an environment with a temperature of 20±5℃ and a humidity of not more than 50%, and the erosion of the aluminum foil by air and water vapor must be avoided during transportation;
The D50 of the active material to be coated is preferably not greater than 4~5μm, the compaction density is not greater than 2.25g/cm, and the specific surface area is within the range of 13~18㎡/g.
The LEV Battery manufacturer tells you that the heat dissipation of the carbon layer is worse than that of the aluminum foil, so it is necessary to fine-tune the belt speed and baking temperature when coating;
LEV Battery manufacturers tell you that carbon-coated aluminum foil can significantly improve the overall performance of lithium batteries and capacitors, but it cannot be used as the main factor to change the performance of certain aspects of the battery, such as battery energy density, high and low temperature performance, high voltage and so on.