If you have ever got stuck in with your car in the middle of nowhere, then you have an idea of why an instant power battery charger is essential. This is a device created to help you jumpstart your car battery anytime you get stuck.
In this article, we shall look at how you can charge or jumpstart an instant power battery charger and how it works.
First, you need to flip the AC connector and plugin a more extensive or an 18 AWG extension cord. Next, you need to plug your extension cord into an electrical outlet on the wall with 120VAC. The RED LED will turn on when the jump starter starts charging. However, you need to understand that charging this device can take up to 72 hours. So you should be patient if you want to get the best results.
When it’s done charging, the RED LED will turn off automatically. The best thing about this device is that it will go into a maintenance mode automatically. The battery is charged fully. This allows it to maintain the full battery charge. As long as the AC cord remains connected to the charging port, the GREEN LED will continue pulsing.
You need to charge this instant power charger as soon as you buy it. Also, you need to charge it immediately after using it. If you have a male to male charger cable, then you can use it to charge the internal battery as you drive.
Please note that it is hazardous to charge the internal battery for more than 30 minutes or leave it unattended. This is because it can cause an explosion hence causing personal injury or damage to property. The best thing about this instant power battery charger is that you can use it even as you drive.
Follow the steps below to safely charge the internal battery as you drive. First, you need to make sure that the car is running, then insert the accessory cable into your power outlet. Next, insert the 2nd end of the accessory cable into the vehicle's lighter socket. However, you should note that the RED LED does not function during this method. Disconnect everything immediately. The engine stops running.
How do you jumpstart an instant power battery charger?
Jump-Starting the instant power battery charge is very easy. All you need to have is a stable power supply. First, you need to locate the charger at the back of your instant power battery charger. Then take the charger plug and connect the female part of the extension cord. Now take the male side of your extension and connect it with a standard 120V outlet.
When it starts charging, a red LED will illuminate, informing you that your device has started charging. Disconnect everything once the LED turns green, which indicates that the internal battery has charged ultimately.
How to prolong the battery life of an instant power battery charger
Let’s face it; every device that runs on a battery requires proper care for it to last long. Otherwise, the battery will not serve you for the years that it's supposed to. First, you need to charge it for at least 72 hours immediately when you buy it. Always charge this battery charger at least once per month so as to keep it active.
The clips also need to be cleaned each time you are done using the instant battery charger. Another important thing that you need to avoid is completely discharging the internal battery of the instant power charger.
What are you going to do when the battery charger starts misbehaving? For example, this is what you need to know when the instant power charger fails to jumpstart your car. Check if the USB switch or the jumpstart is turned on first. Also, you can check if the vehicle's battery has a problem. Another possible cause could be that you have not charred your device, or the clips are not making proper contact with the battery.
When the instant power does not power up your 12V device, then you need to check whether it's turned on. Alternatively, you can check the status by turning on the button on the front. Also, you can check the internal battery power level. Another thing that causes this defect can be short-circuiting, or the device is drawing 15A or more.
How does an instant power battery charger work?
An instant power battery charger helps you to charge or jumpstart your car whenever you get stuck. But you should never use it in a car without a battery since it can damage the entire electrical system.
It is connected to the battery so that it can charge it for a maximum of 30 minutes. It was charging more than this time frame can be very dangerous. Also, you need to turn off the ignition so as to avoid accidents. While charging the car battery, you need to make sure that the cord is far from the fan or any movable parts such as belts and pulleys.
If your car is a negative ground vehicle like most others are, you need to start connecting the red positive clamp. Next, clamp the black negative to the engine or vehicle chassis, which is far from the engine. However, if you are using a complimentary ground vehicle, you need to start with the negative clamp, which is black, then connect the red positive clamp to the engine block or chassis away from the battery.
The instant power battery charger also comes with an emergency light that you can use while clamping it to your vehicle's battery. This light can be used by sliding the on and off button. This device should only be used on boats, garden tractors, and vehicles that only run on a 12 V battery. Also, it should not be used as a replacement for your battery as it can damage the entire electrical system of your vehicle.
With an instant power battery charger, you will never have to worry about getting stuck. You can use it to charge your battery or jumpstart your car. Alternatively, you can use its emergency light as you repair the car. Although this gadget is very useful to car owners, it has to be handled with a lot of care; otherwise, it can cause accidents. It takes about 72 hours to charge this instant power battery charger, and it must be charged at least once in a month to maintain its lifespan.
lithium-ion battery e-bike battery lithium battery