Fax：(+86) 769 2229 0098
ADD：Tonghui Road, Dongcheng Science Park,
Greenway New Energy
ABOUT US PRODUCTS NEWS Scan QR code to follow
Hot to Charge a Dead Battery- Introduction and Methods
Using a lot of batteries in our daily life increases the amount we have to spend on them. The worst thing here is that if a battery gets dead then the expenditures increase. Not only this but replacing a battery is also very bad for the environment. So, why not recharge the battery instead of replacing it.
If you have a dead battery that needs to be replaced, then here we will discuss some tricks that might be very helpful for getting that battery good and running again.
Can you recharge a battery that has been completely dead?Once someone gets a dead battery, the first question that arises in their mind is that can this battery be recharged. Well, the answer to this question is yes as Most of the time a dead battery can be easily recharged because there is still a lot of life left in that battery.
The cause of getting that battery go dead might be an issue that is in the system but mostly there is no issue with the battery itself. Not only this but it is a process that is very simple so that almost everyone can do this easily at home.
Additionally, if you recharge a dead battery, it will come with a lot of benefits as well. Here we will discuss some benefits of recharging the dead batteries that are unable to be used.
Benefits of recharging a dead battery.
The following are some benefits of recharging a dead battery for better usage.
When a dead battery is recharged instead of being replaced, it gets a new life, so its overall lifetime is increased.
Recharging the dead battery means that you are using that old battery instead of buying a new one. This ultimately means that you are reducing your overall expenditures.
?Great for the Environment
When a battery is added to the trash, it causes all types of pollution. However, using it again by recharging means that you are playing the role of a good human being.
How can you charge a battery at home that is dead?Although it seems to be a very simple thing to do, most of the people are still unable to do this. This is the reason here we will tell you how you can recharge a dead battery.
What is the condition of a dead battery?A battery is mostly called dead when it is unable to do its intended usage. For example, a car battery is often called dead when it is unable to start the car. The interesting thing is that the voltage of this car is dropped to a certain level that makes it non-efficient in this case. Otherwise, the dead battery mostly has a lot of charge still present in it.
Charging the dead battery.
Here are some different methods of charging the dead battery at home.
?if you have the battery charger.
If you have the charger for your battery, then things will be very easy for you. It is because all you need to do is to plug in the battery with the charger and this will be charged after some time. There is no complex thing that you need to do to get your battery charged.
?What to do if you do not have a charger at home.
If you do not have a charger for the battery then things will not be as simple for you as they should be in the case of a car battery, you will need to start the car. This can be managed by jump-starting the car with some other car or battery.
Once the car is started, you will need to leave it started or you can also go for a ride. After 2 to 3 hours, the battery will be charged depending on the RPM of the car’s engine.
How do you revive a dead battery?Recharging and reviving a dead battery are two very different things. While recharging is effective for the battery that has an adequate amount of charge left, reviving is the process that is applied to a different type of battery.
In the process of reviving the battery, the battery has almost no charge and the charger is unable to detect the battery. So, here are the things that you need to do to revive a battery.
For the revival process of batteries, you will need the following things.
The same battery is in good condition.
Steps that you need to follow for reviving a dead battery.
The following are the steps that you will need to follow for reviving the battery.
1.Connecting with another battery.
The first thing that you need to do is to connect the battery with the good battery in a parallel connection. This can be easily done with the help of a jumper wire. Once you have done this, let the battery stay in this state for 10 to 15 minutes. One thing to make sure is that none of the batteries gets hot.
2.Connecting the charger.
After 10 to 15 minutes, carefully connect the charger to the bad battery and leave it there for about 10 to 15 minutes.
3.Removing the other battery.
After this time has passed, carefully remove the good battery while leaving the charger on the bad battery working.
4.Letting the battery get charged.
After you have disconnected the good battery, leave the charge on the bad battery for about 24 to 36 hours and let that battery charge.
One thing to make sure during this whole process is that none of the batteries must get very hot. In this case, you will need to stop the process and visit a professional.
ConclusionRecharging the battery can provide a lot of benefits related to usage, cost, and the environment. Whether you have a battery for a car or a home power backup system, recharging the battery must be your first preference. Here we discussed all the steps and tips for easier recharging of the batteries.