博力威  EN

Greenway HK

博力威

Fax:(+86) 769 2229 0098
E-mail: info@greenway-battery.com

ADD:Tonghui Road, Dongcheng Science Park,

Dongguan,China

Subsidiaries

 Copyright ©2006-2020 Greenway battery | Lithium Battery Pack Manufacturer 粤ICP备11070025号

(+86)769 27282088

Hotline

 Greenway Technology

 

Greenway New Energy

    ↵       K-tech New Energy

Greenway Europe

ABOUT US                                   PRODUCTS                                                NEWS                                        Scan QR code to follow

NEWS

>
>
Battery Charger With Desulfation Mode-Introduction and Time

Battery Charger With Desulfation Mode-Introduction and Time

Page view

  A battery charger with desulfation mode is one of the automated procedures which can be quite helpful for the battery. It is mostly used to recover the battery, and it can be used for different kinds of batteries, including the deep cycle battery. It is dependent upon the battery performance and how much you want to recover the battery.

  The approximate time that the battery can take for the desulfation process is 3 to 4 weeks. However, it can take a shorter and longer period of time depending upon the battery status. it also depends upon what type of battery you are trying to de sulfate. If you do not know how to do it at home, you should take it to a professional in order to provide you with information regarding the desulfation process.

  The battery has to be trickle-charged whenever you are trying to go for the desulfation process. It is also recommended to connect the charger parallel to the desulfator. This will help the battery to remain fully charged, and the desulfation process will run smoothly.

  Schumacher Battery Charger With Desulfation Mode

  Schumacher battery charger is one of the best options when it comes to the desulfation mode of the battery. It can provide you with a lot of features that will be very helpful whenever you are trying to go for the desulfation process of the battery.

  Reliable Power

  The charger can provide you with reliable power that will be enough for keeping the battery fully charged during the desulfation phase. It can provide a 15 Amp charge and a 3 Amp charge for the car and other such vehicles.

  This can be very reliable for the battery, and there will be no obstacle to recording battery performance during the desulfation mode. You can totally rely on this battery charger as it is one of the best and highly recommended.

  Smart Charging

  It has microprocessors that can provide smart charging for the battery. It can determine and sense the situation of the battery that is one of the best features. Everything is becoming smartly controlled. You have to get a charger that can control your battery in a smart way.

  This way, the use of technology will save you from a lot of complications, and you will not have to look after the battery manually. Smart charging can make your life easier and can also increase the battery performance, and will help it recover faster during the desulfation mode.

  Voltage Detection

  The battery charger will also provide voltage detection, which can be very useful. It can shift the voltage if the voltages get too high or low. Your battery will be safe from all hazards and voltage overload if there is an automatic voltage detection and voltage shift present in the battery charger. This is one of the most important features that the charger can provide you, and you can easily get the advantages of the desulfation process of the battery.

  LED Display

  LED display present in the battery charger is one of the additional features. This will make your life easier, and you will be able to detect the charge level of the battery. It will also help you in preventing the battery from overcharging, which is one of the important factors desulfation process.

  Safe and Convenient

  This battery charger can also provide you with safety and convenience. The reverse hook-up will provide protection against many factors. If you want safety and convenience during the desulfation process and charging of the battery, you should go for the Schumacher Battery charger.

  What is the Desulfation mode on a battery charger?

  Desulfation mode is a battery slitter unique technique that can help a lot in the recovery of the battery. However, there are certain things you have to take care of whenever you are trying to go for the desulfation mode of the battery.

  Applying Voltage

  In the desulfation process, the battery slitter determines that the battery is sulfated. After the detection of complete sulfation, it applies a voltage of 20V.

  This voltage is applied at the low controlled current. There is also a duration of the desulfation process, which is up to 2 hours. However, it can vary depending upon the status of your battery and how well your battery can function between the sulfation and desulfation process of the battery.

  Recovery of the Battery

  This helps a lot in the recovery of the battery and prepares it for further use. The battery can start accepting the charge from a quality battery charger after it is desulfated.

  This is one of the best techniques that can be very helpful in keeping the battery safe from chemical processes happening in the battery and all the reactions that can give rise to impairment of the battery. There are many battery chargers available with the same feature, and it will provide desulfation to the battery.

  How long does it take Desulfate a battery?

  This is one of the variable questions because it depends on many conditions. The time to desulfate a battery depends on the size of the battery and its current status. It also depends upon what type of battery you are using and how much you are making it perform.

  In general, to desulfate a battery, you have to provide it for 48 hours and even weeks. This depends on the size and condition of the battery, as mentioned. If you are not sure how much time you should provide the battery and you are not aware of the battery status, it is recommended to take professional help. It is important to desulfate the battery if you want to make it work for a long time and keep it efficient.

  It can take you 2 days to weeks; however, you have to be patient and let the process complete at its own pace. This way, the process can be very beneficial and accurate for the battery.

  Conclusion

  The desulfation process of the battery can be beneficial in the recovery phase. There are also battery chargers available that can provide desulfation. The duration of the process depends on many factors. You have to keep the factors in mind, and you can also look for experienced professionals.

 

 

 

lithium-ion battery  e-bike battery  lithium battery